| ELECTRIC MOTOR POWER RATING | 5.0 HORSEPOWER |
| ACCESSORY COMPONENTS AND QUANTITY | DRILLS,JOBBERS STRAIGHT SHANK HIGH SPEED 1/8 IN. TO 1/2 IN. BY 64THS,2 SETS; DRILLS ASA TAPER SHANK HIGH SPEED 1/2 IN. TO 1 IN. BY 16THS,2 SETS; DRILLS ASA TAPER SHANK,HIGH SPEED 1 IN. TO 1-1/2 IN. BY 8THS,2 SETS; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 3 TAPER,1; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 2 TAPER,1; SLEEVE REDUCING ASA NO. 4 TAPER TO NO. 1 TAPER,1; TABLE,PLAIN BOX TYPE 1 |
| ARM SIZE | 4.000 FEET |
| BASE WORKING SURFACE LENGTH | 53.000 INCHES NOMINAL |
| BASE WORKING SURFACE WIDTH | 30.000 INCHES NOMINAL |
| COLUMN DIAMETER | 9.000 INCHES NOMINAL |
| CURRENT TYPE | AC |
| DEPARTURE FROM CITED DOCUMENT | AKYD AND FEAT |
| FREQUENCY IN HERTZ | 60.0 |
| HEAD TRAVEL DISTANCE ON ARM | 37.000 INCHES NOMINAL |
| MAIN DRIVE TYPE | ELECTRIC MOTOR |
| MAXIMUM DISTANCE FROM SPINDLE CENTER TO COLUMN | 48.000 INCHES |
| MAXIMUM DISTANCE FROM SPINDLE NOSE TO BASE | 50.000 INCHES |
| MINIMUM DISTANCE FROM SPINDLE CENTER TO COLUMN | 13.000 INCHES |
| MINIMUM DISTANCE FROM SPINDLE NOSE TO BASE | 16.000 INCHES |
| MOUNTING TYPE | FLOOR |
| NONDEFINITIVE SPEC/STD DATA | A6 SIZE |
| PHASE | THREE |
| SPECIAL FEATURES | FUNGUS RESISTANCE; RADIO INTERFERENCE SUPPRESSION ACROSS THE LINE MAGNETIC STARTER |
| SPINDLE SOCKET TAPER SIZE | 4 MORSE |
| SPINDLE SPEED QUANTITY | 9 |
| SPINDLE SPEED RANGE IN RPM | +90.0 TO 1500.0 |
| SPINDLE TRAVEL DISTANCE | 10.000 INCHES MINIMUM |
| VOLTAGE IN VOLTS | 208.0 |