| ACCESSORY COMPONENTS AND QUANTITY | METRIC TRANSPOSING GEARS;TAPER ATTACHMENT;PREPARING LATHE FOR COOLANTPUMP AND RESERVOIR;SIZE LOO LONG TAPERKEY DRIVE SPINDLE NOSE IN LIEU OF REGULAR CAMLOCK SPINDLE NOSE;SPECIAL PAINT COLORS;INCH/METRIC COMPOUND AND CROSSFEED DIALS |
| ACTUAL SWING OVER BED | 13.125 INCHES NOMINAL |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE QUANTITY | 1 |
| CENTER TO CENTER DISTANCE | 39.000 INCHES NOMINAL |
| DESIGN TYPE | SCREW |
| HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED OR STEP CONE PULLEY |
| HOLE DIAMETER THROUGH SPINDLE | 2.250 INCHES NOMINAL |
| MOUNTING TYPE | FLOOR |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL OR TOOLROOM |
| RATED SWING | 13.000 INCHES NOMINAL |
| SPINDLE SPEED QUANTITY | 8 OR 16 |
| SPINDLE SPEED RANGE IN RPM | +20.0 TO 940.0 |
| SWING OVER CROSS SLIDE | 7.750 INCHES NOMINAL |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO 224.0 PER INCH |