| ACCESSORY COMPONENTS AND QUANTITY | SIZE LOO LONG TAPER KEY DRIVE SPINDLE NOSE IN LIEU OF REGULAR CAMLOCK SPINDLE NOSE;23/8-6 THREADED SPINDLE NOSE IN LIEU OF REGULAR CAMLOCK SPINDLE NOSE;SPECIAL PAINT COLORS;METRIC TRANSPOSING GEARS; INCH/METRIC CROSSFEED AND COMPOUND REST DIALS;TAPER ATTACHMENT;PREPARING LATHE FOR COOLANT;COOLING EQUIPMENT; FINE FEED HAND WHEEL;SCREW FEED DOUBLETOOL SLIDE;HARDENED TAPER TAILSTOCK SPINDLE;HARDENED AND GROUND CROSS FEEDAND COMPOUND REST SCREWS |
| ACTUAL SWING OVER BED | 25.125 INCHES NOMINAL |
| CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| CARRIAGE QUANTITY | 1 |
| CENTER TO CENTER DISTANCE | 77.000 INCHES NOMINAL |
| DESIGN TYPE | SCREW |
| HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED OR STEP CONE PULLEY |
| MOUNTING TYPE | FLOOR |
| PERFORMANCE TYPE | STANDARD DUTY |
| PURPOSE FOR WHICH DESIGNED | GENERAL OR TOOLROOM |
| RATED SWING | 16.000 INCHES MINIMUM AND 24.000 INCHES MAXIMUM |
| SPINDLE SPEED QUANTITY | 8 OR 16 |
| SPINDLE SPEED RANGE IN RPM | +15.0 TO 980.0 |
| SWING OVER CROSS SLIDE | 18.750 INCHES NOMINAL |
| THREAD CHANGE QUANTITY | 48 |
| THREAD QUANTITY RANGE | +4.0 TO 224.0 PER INCH |