|
|
|
National Stock Number:
3940-01-498-9634
Federal Supply Class:
3940
National Item Identification Number:
014989634
Description:
ADAPTER,HOISTING
Detail:
AN ITEM USUALLY RIGID IN CONSTRUCTION DESIGNED TO BE ATTACHED TO ANOTHER ITEM TO ADAPT IT TO AN EYE, RING, LOOP, OR THE LIKE, FOR HOISTING. FOR ITEMS DESIGNED TO BE USED FOR HOISTING AND ALSO PROVIDE ACCOMMODATIONS FOR ADAPTING A JACK TO AN AIRCRAFT JACKING POINT, SEE ADAPTER, AIRCRAFT JACKING POINT. EXCLUDES BOLT, EYE; AND SLING (AS MODIFIED).
|
Manufacturer Information:
| 23039441 | 00PP1 | GENERAL TOOL COMPANY | | 23039441 | 38ZC7 | ROLLS-ROYCE MARINE NORTH AMERICA INC. | | 23039441 | 63005 | ROLLS-ROYCE CORPORATION | | 23070790 PC 23039441 | 63005 | ROLLS-ROYCE CORPORATION | | 23039441 | 96454 | GENERAL TOOL COMPANY |
|
Techincal Specification:
| ATTACHMENT METHOD | BOLTED AND HOLE | | OVERALL HEIGHT | 4.190 INCHES NOMINAL | | OVERALL LENGTH | 2.760 INCHES NOMINAL | | OVERALL WIDTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SPECIAL FEATURES | PART IS RECTANGULAR AT THE TOP WITH A SLOT 0.560 W X 1.250 L ON CENTER LINE; BOTTOM HAS A 2.760 DIAMETER CUT OUT CENTERED 2.810 INCHES FROM TOP; PART IS ROUNDED OFF ON THE OUTSIDE OF THE BOTTOM HALF OF THIS CIRCULAR CUTOUT, LEAVING A WALL 0.750 IN THICK; 2 HOLES ARE DRILLED THRU FROM THE SIDE, ONE 0.342-0.352 TAP DRILLED THRU, C'BORED 0.56X0.38 DEEP, THREADED 0.3125-18UNC-28 TAP THRU, 1.405 INCH FROM TOP; THE OTHER 0.405-0.415 THRU, 0.560 INCH FROM TOP | | SUPPLEMENTARY FEATURES | CAGE CALLS THIS: LINK, ENGINE LIFT FIXTURE | | SURFACE TREATMENT | NICKEL | | USAGE DESIGN | AIRCRAFT ENGINE ACCESSORY |
|
|