| DRIVE TYPE | BELT |
| ELECTRIC MOTOR QUANTITY | 1 |
| AMBIENT TEMP | 110.0 FAHRENHEIT |
| COMPONENT FOR WHICH DESIGNED | COMPRESSOR |
| COMPRESSING UNIT CYLINDER BORE DIAMETER | 4.250 INCHES NOMINAL |
| COMPRESSING UNIT CYLINDER QUANTITY | 2 |
| COMPRESSING UNIT DESIGN TYPE | OPEN |
| COMPRESSING UNIT STROKE LENGTH | 3.000 INCHES |
| COMPRESSING UNIT TYPE | RECIPROCATING |
| COMPRESSOR COOLING MEDIUM | AIR |
| COMPRESSOR SPEED AT RATED CAPACITY IN RPM | 564.0 |
| CONDENSER COOLING MEDIUM | WATER |
| CONDENSER HEAT TRANSFER AREA | 80.000 SQUARE FEET |
| CONDENSER OVERALL LENGTH | 6.792 FEET NOMINAL |
| CONDENSER SHELL OUTSIDE DIAMETER | 12.750 INCHES NOMINAL |
| CONDENSER TYPE | SHELL OR TUBE |
| DISCHARGE PRESSURE | 117.0 POUNDS PER SQUARE INCH GAGE |
| FREQUENCY IN HERTZ | 60.0 |
| MEDIA FOR WHICH DESIGNED | FREON 12 USE REFRIGERANT R-12 |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 1730.0 |
| PHASE | THREE |
| PRIME MOVER HORSEPOWER RATING | 7.5 |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| REFRIGERATION FLOW RATE IN TONS PER HOUR | 6.000 |
| SPECIAL FEATURES | DESIGNED FOR PHOTO LAB PROCESS WATER COOLING |
| WATER FOR WHICH DESIGNED | SALT |
| SUCTION PRESSURE | 32.6 POUNDS PER SQUARE INCH |
| SUPPLEMENTARY FEATURES | USED ON FREON-12 COMPRESSOR 7H SERIES |