|
|
|
National Stock Number:
4140-00-231-1414
Federal Supply Class:
4140
National Item Identification Number:
002311414
Description:
FAN,VENTILATING
Detail:
A nonpositive displacement mechanical device having either an axial or centrifugal fan impeller. It is designed to move free air or gas from indoors to outdoors or vice versa over a wide range of volumes at low pressures. It is supported by a ring, plate, or shroud or may be inclosed in a housing. It is designed for installation in a window, roof or wall opening, or the like.
|
Manufacturer Information:
| 247AS-C0317-001 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 247ASC0317-001 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | MBT2206F0-1 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATED SENSING, INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | FIXED | | WIDTH | 3.438 INCHES NOMINAL | | DIAMETER | 4.375 INCHES NOMINAL | | LENGTH | 1.500 INCHES NOMINAL | | HEIGHT | 3.625 INCHES NOMINAL | | HOUSING INSIDE DIAMETER | 3.250 INCHES NOMINAL | | QUANTITY | 1 | | MATERIAL | PLASTIC BLADE | | ZINC ALLOY HOUSING | | SURFACE TREATMENT | ENAMEL SEMIGLOSS HOUSING | | DRIVE TYPE | DIRECT | | ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE | | PRIME MOVER TYPE | ELECTRIC MOTOR | | SPEED ADJUSTMENTS | SINGLE SPEED | | PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL | | INCLOSURE TYPE | FULLY INCLOSED | | AMBIENT TEMP AT FULL RATED POWER | -25.0 DEG FAHRENHEIT AND | | 175.0 DEG FAHRENHEIT | | ELECTRICAL CONNECTION TYPE | WIRE LEAD | | PRIME MOVER POWER RATING | 0.014 HORSEPOWER | | OPERATING SPEED AT RATED CAPACITY IN RPM | 5200.0 | | VOLTAGE IN VOLTS AND CURRENT TYPE | 200.0 AC | | PHASE | THREE | | FREQUENCY IN HERTZ | 400.0 | | AIR FLOW RATE | 75.000 CUBIC FEET PER MINUTE NOMINAL | | STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT | | FLOW DIRECTION | OUTWARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE AND | | 8 UNTHREADED HOLE | | TEST DATA DOCUMENT | 30003-247ASC0314-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 30003 | | DESIGN CONTROL REFERENCE | 247AS-C0317-001 |
|
|