| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| AIR FLOW RATE | 17.5 CUBIC FEET PER MINUTE MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP |
| OUTLET LOCATION | TOP |
| DISCHARGE DIRECTION | HORIZONTAL |
| MATERIAL | PLASTIC PHENOLIC HOUSING |
| STYLE DESIGNATOR | FIXED, RECTANGULAR OUTLETS |
| WIDTH | 3.250 INCHES MAXIMUM |
| LENGTH | 2.937 INCHES NOMINAL |
| OUTLET INSIDE WIDTH | 1.188 INCHES NOMINAL |
| HEIGHT | 2.625 INCHES NOMINAL |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 0.036 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 10000.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| STAGE QUANTITY | 1 |
| TEST DATA DOCUMENT | 72314-1214-2024 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 25140 |
| DESIGN CONTROL REFERENCE | 19A518 |