| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| AIR FLOW RATE | 95.0 CUBIC FEET PER MINUTE NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| OUTLET LOCATION | TOP |
| DISCHARGE DIRECTION | HORIZONTAL |
| MATERIAL | STEEL OVERALL |
| STYLE DESIGNATOR | FIXED, RECTANGULAR OUTLETS |
| WIDTH | 5.812 INCHES NOMINAL |
| LENGTH | 5.141 INCHES NOMINAL |
| OUTLET INSIDE WIDTH | 2.062 INCHES NOMINAL |
| OUTLET INSIDE HEIGHT | 2.406 INCHES NOMINAL |
| HEIGHT | 5.500 INCHES NOMINAL |
| QUANTITY | 1 |
| SURFACE TREATMENT | CADMIUM AND |
| CHROMATE BLADE |
| ENAMEL HOUSING INSIDE |
| ENAMEL HOUSING OUTSIDE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -55.0 DEG CELSIUS AND |
| 71.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 0.020 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3300.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC |
| PHASE | SINGLE |
| FREQUENCY IN HERTZ | 50.0 AND |
| 60.0 |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | HUMIDITY PROOF AND |
| SALT SPRAY RESISTANT AND |
| SHOCK PROOF AND |
| VIBRATION PROOF |
| STAGE QUANTITY | 1 |
| SPECIAL FEATURES | W/O MTG FLANGE |
| TEST DATA DOCUMENT | 94117-110019P1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |