|
|
|
National Stock Number:
4140-00-585-8370
Federal Supply Class:
4140
National Item Identification Number:
005858370
Description:
FAN,VENTILATING
Detail:
A nonpositive displacement mechanical device having either an axial or centrifugal fan impeller. It is designed to move free air or gas from indoors to outdoors or vice versa over a wide range of volumes at low pressures. It is supported by a ring, plate, or shroud or may be inclosed in a housing. It is designed for installation in a window, roof or wall opening, or the like.
|
Manufacturer Information:
| 2187756 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 86-164 | 56232 | LOCKHEED MARTIN CORPORATION | | A0-27280 | 82877 | ROTRON INCORPORATED |
|
Techincal Specification:
| STYLE DESIGNATOR | FIXED | | DIAMETER | 7.000 INCHES NOMINAL | | LENGTH | 4.875 INCHES MINIMUM AND | | 5.000 INCHES MAXIMUM | | HOUSING INSIDE DIAMETER | 7.500 INCHES NOMINAL | | QUANTITY | 1 | | MATERIAL | ALUMINUM OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | DRIVE TYPE | DIRECT | | ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE | | PRIME MOVER TYPE | ELECTRIC MOTOR | | SPEED ADJUSTMENTS | SINGLE SPEED | | PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL | | INCLOSURE TYPE | FULLY INCLOSED | | AMBIENT TEMP AT FULL RATED POWER | -55.0 DEG CELSIUS AND | | 71.0 DEG CELSIUS | | ELECTRICAL CONNECTION TYPE | WIRE LEAD | | PRIME MOVER POWER RATING | 0.118 HORSEPOWER | | OPERATING SPEED AT RATED CAPACITY IN RPM | 3800.0 | | VOLTAGE IN VOLTS AND CURRENT TYPE | 115.0 AC | | PHASE | SINGLE | | FREQUENCY IN HERTZ | 400.0 | | AIR FLOW RATE | 350.0 CUBIC FEET PER MINUTE MAXIMUM | | STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER | | ENVIRONMENTAL PROTECTION | HUMIDITY PROOF AND | | SALT SPRAY RESISTANT AND | | SHOCK PROOF AND | | VIBRATION PROOF | | FLOW DIRECTION | OUTWARD | | MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE | | TEST DATA DOCUMENT | 10001-2187756 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 82877 | | DESIGN CONTROL REFERENCE | A0-27280 |
|
|