| DRIVE TYPE | DIRECT |
| AIR FLOW RATE | 300.0 CUBIC FEET PER MINUTE MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| OUTLET LOCATION | CENTER |
| DISCHARGE DIRECTION | HORIZONTAL |
| MATERIAL | ALUMINUM BLADE |
| STEEL HOUSING |
| DIAMETER | 4.500 INCHES NOMINAL |
| SURFACE TREATMENT | ANODIZE BLADE |
| ZINC HOUSING OUTSIDE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| INCLOSURE TYPE | FULLY INCLOSED |
| ELECTRICAL CONNECTION TYPE | CONNECTOR RECEPTACLE |
| PRIME MOVER POWER RATING | 3.000 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 22900.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 208.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 40.0 INCHES OF WATER |
| STAGE QUANTITY | 1 |
| FEATURES PROVIDED | RADIO INTERFERENCE SHIELDING |
| SPECIAL FEATURES | IMPELLER ROTATION DIRECTION:COUNTERCLOCKWISE;FAN STYLE:F10A FIXED,INVERTED,ROUND OUTLET;FAN LENGTH:9.812 IN. NOM.;FAN WIDTH:7.125 IN. NOM.;FAN HEIGHT:7.937 IN. NOM.;FAN QTY:1;OPERATING CONTROL TYPE:ANY ACCEPTABLE;BEARING TYPE:ANY ACCEPTABLE |
| TEST DATA DOCUMENT | 01359-201486 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |