| DRIVE TYPE | DIRECT |
| AIR FLOW RATE | 870.000 CUBIC FEET PER MINUTE NOMINAL |
| AMBIENT TEMP AT FULL RATED POWER | -55.0 CELSIUS AND 65.0 CELSIUS |
| DISCHARGE DIRECTION | ANGULAR DOWN AND ANGULAR UP AND HORIZONTAL AND VERTICAL DOWN AND VERTICAL UP |
| DIAMETER | 6.000 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT |
| HEIGHT | 11.780 INCHES NOMINAL |
| INCLOSURE TYPE | FULLY INCLOSED |
| LENGTH | 10.840 INCHES NOMINAL |
| OUTLET INSIDE HEIGHT | 4.322 INCHES NOMINAL |
| OUTLET INSIDE WIDTH | 4.257 INCHES NOMINAL |
| OUTLET LOCATION | BOTTOM OR TOP |
| MATERIAL | STEEL OVERALL |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 BASE PLATE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3250.0 |
| PHASE | THREE |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| PRIME MOVER POWER RATING | 1.380 HORSEPOWER |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| QUANTITY | 1 |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| STAGE QUANTITY | 1 |
| WIDTH | 11.440 INCHES NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| STYLE DESIGNATOR | FIXED, RECTANGULAR OUTLETS |
| SURFACE TREATMENT | ENAMEL LUSTERLESS OVERALL |
| TEST DATA DOCUMENT | 03538-7747341+1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 220.0 AC |