| STYLE DESIGNATOR | FIXED |
| LENGTH | 6.000 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 6.500 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -65.0 DEG FAHRENHEIT AND |
| 190.0 DEG FAHRENHEIT |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 650.0 WATTS |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3800.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 200.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 160.0 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| FLOW DIRECTION | INWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 FLANGE AND |
| 8 UNTHREADED HOLE |
| SPECIAL FEATURES | DESIGNED FOR HIGH DENSITY GAS (SF6) APPLICATION,RATINGS FOR HIGH DENSITY GAS PER TEST DOCUMENT |
| TEST DATA DOCUMENT | 97942-582R043 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 04320 |
| DESIGN CONTROL REFERENCE | BT4520V-2-2 |