| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| BOLT HOLE QUANTITY | 4 |
| BOLT HOLE SPACING | 2-1/8 IN. BY 1-1/8 IN. |
| BOLT HOLE THREAD SIZE | 0.375-16 |
| CONNECTION TYPE | INLET AND OUTLET |
| CONNECTION DESIGN | FLANGED |
| CONNECTION QUANTITY | 2 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.175 CUBIC INCHES |
| DISPLACEMENT TYPE | VARIABLE |
| MATERIAL | STEEL HOUSING |
| MOUNTING BOLT HOLE SPACING | 3.536 IN BY 3.536 |
| MOUNTING HOLE DIAMETER | 0.562 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 2500.0 |
| PITCH DIAMETER | 1.192 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF AND UNC |
| SHAFT PROTRUSION LENGTH | 2.188 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 1.250 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 1.247 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 1.050 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| SPLINE PITCH | 12/24 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 14 |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.563-18 AND 0.375-16 |
| TORQUE LOAD RATING | 1470.0 INCH-POUNDS |