| DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| ACCESSORY COMPONENTS AND QUANTITY | NEEDLE BEARING 1; BENDIX DRIVE 1; PINION GEAR HOUSING FLANGE 1; PINION GEAR HOUSING 1 |
| BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL |
| BOLT HOLE QUANTITY | 3 |
| BOLT HOLE SPACING | 2.480 IN. BY 2.480 |
| CONNECTION TYPE | INLET AND OUTLET |
| CONNECTION DESIGN | FLANGED |
| CONNECTION GOVERNMENT SPEC/STD | SAE TYPE NO. 3 |
| CONNECTION QUANTITY | 2 |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI |
| MOUNTING BOLT HOLE SPACING | MTG HOLES ARE SPACED ON 5.750 IN. DIA BOLT CIRCLE,UPPER HOLE IS 4.313 IN. ABOVE THE TWO LOWER HOLES AND THEY ARE 4.980 IN. APART |
| MOUNTING HOLE QUANTITY | 3 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 9000.0 |
| SCREW THREAD SERIES DESIGNATOR | NPT |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE LENGTH | 1.0938 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.750 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.213 INCHES NOMINAL |
| SPLINE QUANTITY | 17 |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.375018 |