| DRIVE SHAFT TYPE | KEYED |
| ACCESSORY COMPONENTS AND QUANTITY | PRESSURE COMPENSATOR 1 |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| CONNECTION DESIGN | THREADED |
| CONNECTION QUANTITY | 2 AND 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 3.760 CUBIC INCHES |
| DISPLACEMENT TYPE | VARIABLE |
| KEY HEIGHT | 0.312 INCHES NOMINAL |
| KEY LENGTH | 1.250 INCHES NOMINAL |
| KEY WIDTH | 0.312 INCHES NOMINAL |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2500PSI AT UNKNOWN DEGREE F |
| MOUNTING BOLT CIRCLE DIAMETER | 7.125 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.688 INCHES NOMINAL |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 1800.0 |
| SPECIAL FEATURES | 12.88IN.L,8.88IN.W,7.44IN.H; END PORT POSITIONS; DRAIN ON BOTTOM |
| SCREW THREAD SERIES DESIGNATOR | UN AND UNF |
| SHAFT DIAMETER | 1.250 INCHES NOMINAL |
| SHAFT PROTRUSION LENGTH | 1.880 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 1.625-12 AND 0.750-16 |
| TORQUE LOAD RATING | 59.9 INCH-POUNDS |