| DRIVE SHAFT GOVERNMENT STANDARD | SAE J498 |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION TYPE | INLET AND DRAIN |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | SAE J518C AND MS33649-06 |
| CONNECTION QUANTITY | 2 AND 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 9.665 CUBIC INCHES |
| DISPLACEMENT TYPE | VARIABLE |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 2500PSI AT MINUS 65 DEG F TO PLUS125 DEG F |
| MOUNTING BOLT HOLE SPACING | 4.508 IN. BX 4.508 IN. |
| MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3000.0 OR 3600.0 |
| PITCH DIAMETER | 1.167 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UN AND NPTF |
| SHAFT PROTRUSION LENGTH | 1.940 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 1.000 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 1.219 INCHES MINIMUM AND 1.229 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 1.050 INCHES MINIMUM AND 1.063 INCHES MAXIMUM |
| SPLINE PITCH | 12/24 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 14 |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.500-13 AND 0.380-18 |
| TORQUE LOAD RATING | 2670.0 INCH-POUNDS |