| CRITICALITY CODE JUSTIFICATION | FEAT |
| CYLINDER QUANTITY | 9 |
| DISCHARGE PRESSURE | 3000.0 POUNDS PER SQUARE INCH GAGE |
| DISCHARGE CONNECTION QUANTITY | 1 |
| DISCHARGE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.562-18 UNJF |
| DISCHARGE CONNECTION TYPE | THREADED INTERNAL |
| DRIVE CONNECTION TYPE | GEAR |
| DRIVE SHAFT END DIAMETER | 0.497 INCHES NOMINAL |
| DRIVE SHAFT LENGTH | 0.500 INCHES NOMINAL |
| DRIVE SHAFT TYPE | SPLINED, STRAIGHT EXTERNAL |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION THREAD SIZE AND SERIES/TYPE DESIGNATOR | 0.562-18 UNJF |
| INTAKE CONNECTION TYPE | THREADED INTERNAL |
| MAXIMUM DISCHARGE FLOW RATE | 0.5 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | HYDROCARBON FUELS AND OILS |
| OPERATION METHOD | POWERED |
| PUMP RECIPROCATING DESIGN | SINGLE ACTING |
| PUMPING ELEMENT TYPE | PISTON |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| RECIPROCATING STROKE TYPE | FIXED |
| SPECIAL FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| VOLUME CONTROL TYPE | PRESSURE COMPENSATION |