| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| BOLT HOLE QUANTITY | 4 |
| BOLT HOLE SPACING | 1.190 IN. BY 2.310 IN. |
| BOLT HOLE THREAD SIZE | 0.438-14 |
| CONNECTION TYPE | INLET AND OUTLET AND DRAIN |
| CONNECTION DESIGN | FLANGED AND THREADED |
| CONNECTION GOVERNMENT SPEC/STD | SAE-J518B |
| CONNECTION QUANTITY | 2 AND 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 8.080 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | STEEL HOUSING |
| MOUNTING BOLT HOLE SPACING | 4.508 IN. BY 4.508 IN. |
| MOUNTING HOLE DIAMETER | 0.560 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | PAD |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 4000.0 |
| PITCH DIAMETER | 1.137 INCHES MINIMUM AND 1.146 INCHES MAXIMUM |
| SHAFT PROTRUSION LENGTH | 1.690 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE LENGTH | 1.000 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 1.2243 INCHES MINIMUM AND 1.2293 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 1.0497 INCHES MINIMUM AND 1.0627 INCHES MAXIMUM |
| SPLINE PITCH | 12/24 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 14 |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.250-16 |
| TORQUE LOAD RATING | 3218.0 INCH-POUNDS |