| CENTRIFUGAL PUMP DESIGN | RADIAL FLOW |
| CENTRIFUGAL PUMP IMPELLER QUANTITY | 1 |
| CENTRIFUGAL PUMP IMPELLER SUCTION TYPE | DOUBLE |
| COOLING METHOD | BLOWER COOLED |
| CURRENT RATING IN AMPS | 16.2 |
| CURRENT TYPE | AC |
| DISCHARGE CONNECTION QUANTITY | 1 |
| DISCHARGE CONNECTION TYPE | ROUND FLANGE |
| DISCHARGE PRESSURE | 108.0 POUNDS PER SQUARE INCH GAGE |
| FREQUENCY IN HERTZ | 60.0 |
| INCLOSURE TYPE | FULLY INCLOSED |
| INTAKE CONNECTION QUANTITY | 1 |
| INTAKE CONNECTION TYPE | ROUND FLANGE |
| MATERIAL | IRON PUMP BASIC |
| MAXIMUM DISCHARGE FLOW RATE | 42.0 GALLONS PER MINUTE |
| MEDIA FOR WHICH DESIGNED | WATER, DISTILLED |
| MOUNTING TYPE | FRAME |
| OPERATING SPEED AT RATED CAPACITY | 3500.0 REVOLUTIONS PER MINUTE |
| PHASE | THREE |
| PRIME MOVER COOLING MEDIUM | AIR |
| PRIME MOVER POWER RATING | 10.0 HORSEPOWER |
| PRIME MOVER QUANTITY | 1 |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| PUMP QUANTITY | 1 |
| PUMPING ELEMENT OPERATING POSITION | HORIZONTAL |
| SPECIAL FEATURES | INLET FLANGE:BRONZE,4EA 3/4IN. HOLE ON 4 3/4IN. BOLT CIRCLE; OUTLET FLANGE:BRONZE,4EA 5/8IN.HOLE ON 3 7/8IN.BOLT CIRCLE; IMPELLER GUNMETAL QQ-C-390 |
| SPECIAL TEST FEATURES | VIBRATION ISOLATORS NOT INCLUDED,SHOULD BE RETAINED FROM PREVIOUS INSTALLATION |
| STAGE QUANTITY | 1 |
| TOTAL HEAD | 250.000 FEET |
| UNPACKAGED UNIT LENGTH | 19.500 INCHES NOMINAL |
| UNPACKAGED UNIT WIDTH | 11.7500 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 460.0 |