|
|
|
National Stock Number:
4330-00-341-4426
Federal Supply Class:
4330
National Item Identification Number:
003414426
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3161-02 | 43990 | NORGREN C A CO | | 3161-17 | 43990 | NORGREN C A CO |
|
Techincal Specification:
| BODY OVERALL LENGTH | 1.406 INCHES MINIMUM AND 1.469 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | MOLDED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 15.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | LARGEST OUTSIDE DIAMETER | 1.200 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR | | SMALLEST OUTSIDE DIAMETER | 1.062 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 1.030 INCHES MINIMUM | | TAPERED HOLE MINOR DIAMETER | 0.892 INCHES MINIMUM AND 0.955 INCHES MAXIMUM |
|
|