|
|
|
National Stock Number:
4330-00-603-3428
Federal Supply Class:
4330
National Item Identification Number:
006033428
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1537411 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BODY OVERALL LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | MOLDED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | LARGEST OUTSIDE DIAMETER | 0.272 INCHES MINIMUM AND 0.275 INCHES MAXIMUM | | MATERIAL | COPPER ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SMALLEST OUTSIDE DIAMETER | 0.211 INCHES MINIMUM AND 0.227 INCHES MAXIMUM | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 0.156 INCHES NOMINAL | | TAPERED HOLE MINOR DIAMETER | 0.109 INCHES NOMINAL |
|
|