|
|
|
National Stock Number:
4330-00-620-7164
Federal Supply Class:
4330
National Item Identification Number:
006207164
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 103-3P | 05695 | MASTER PNEUMATIC-DETROIT INC | | KA103-03E3 | 05695 | MASTER PNEUMATIC-DETROIT INC |
|
Techincal Specification:
| DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.750 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.036 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | POROUS OR SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | COPPER ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR | | SPECIAL FEATURES | U/O MODELS FD100-2,FD100-3,FD100-4,FD100-6X FLUID FILTERS | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
|
|