|
|
|
National Stock Number:
4330-00-731-9118
Federal Supply Class:
4330
National Item Identification Number:
007319118
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 038086 | 90005 | PUROLATOR FACET INC. | | 038087 | 90005 | PUROLATOR FACET INC. | | 038087-00-45 | 90005 | PUROLATOR FACET INC. | | 042569 | 90005 | PUROLATOR FACET INC. |
|
Techincal Specification:
| BODY DIAMETER | 1.766 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.016 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.594 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SPECIAL FEATURES | W1/2 SYNTHETIC RUBBER O RINGS,2 PLASTIC GASKETS AND SPRING IN ID | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS |
|
|