|
|
|
National Stock Number:
4330-00-844-0418
Federal Supply Class:
4330
National Item Identification Number:
008440418
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 13R10 | 13800 | PARKER-HANNIFIN CORPORATION | | ACFF | 15472 | SOLVENTUM PURIFICATION INC. | | D-CCFF | 15472 | SOLVENTUM PURIFICATION INC. |
|
Techincal Specification:
| DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 10.000 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 30.0 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 30.0 NOMINAL | | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | COTTON FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | WATER AND FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | FDA GRADE; TINNED STEEL CORE | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | 250.0 FAHRENHEIT NOMINAL |
|
|