|
|
|
National Stock Number:
4330-00-856-8560
Federal Supply Class:
4330
National Item Identification Number:
008568560
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 52P60 | 94592 | FLUID CONDITIONING PRODUCTS, INC. |
|
Techincal Specification:
| BODY OVERALL LENGTH | 4.438 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | MOLDED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 2.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | LARGEST OUTSIDE DIAMETER | 1.750 INCHES NOMINAL | | MATERIAL | COPPER ALLOY FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SMALLEST OUTSIDE DIAMETER | 1.688 INCHES NOMINAL | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MAJOR DIAMETER | 1.590 INCHES NOMINAL | | TAPERED HOLE MINOR DIAMETER | 1.528 INCHES NOMINAL | | TEMP RATING | -300.0 FAHRENHEIT MINIMUM AND 550.0 FAHRENHEIT MAXIMUM |
|
|