|
|
|
National Stock Number:
4330-01-018-6196
Federal Supply Class:
4330
National Item Identification Number:
010186196
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 21888 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 21888-4-2 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 2188842 | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 1000.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.160 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.140 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.050 INCHES NOMINAL | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE OR WOVEN SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE AND 2.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | 0.250 INCH FLANGE DIAMETER OUTLET END,FLARED 37.0 DEGREES | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 550.0 DEG FAHRENHEIT MAXIMUM |
|
|