|
|
|
National Stock Number:
4330-01-047-0596
Federal Supply Class:
4330
National Item Identification Number:
010470596
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 199401 | 30076 | HYSTER-YALE GROUP, INC. | | 199401 | 80924 | BOMAG AMERICAS, INC. | | P-50-2-60 | 55524 | FLOW EZY FILTERS INC |
|
Techincal Specification:
| PROPRIETARY CHARACTERISTICS | PACS | | MESH SIZE | 60.0 | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 2.000 INCHES | | SPECIAL FEATURES | NYLON END;HEX FACILITY;50 GPM;FILTRATION RATING 250.0 MICRONS;ABSOLUTE | | WIRE DIAMETER | 0.010 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | NPT | | DESIGN TYPE | LIMITED | | DROP PRESSURE | 0.2 POUNDS PER SQUARE INCH | | BODY DIAMETER | 4.188 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.125 INCHES NOMINAL | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 2.3 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | III STYLE DESIGNATOR | SUMP TYPE |
|
|