|
|
|
National Stock Number:
4330-01-047-2322
Federal Supply Class:
4330
National Item Identification Number:
010472322
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10457050 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 4330PL2171611 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 6303474 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6303474-001 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 625461 | F6980 | THALES TRAINING ET SIMULATION SAS | | 625461 | FAQU7 | THALES SERVICES SAS | | 925602 | 05779 | PARKER-HANNIFIN CORPORATION | | 9313265 | 64829 | ARVINMERITOR INC | | 91752482 | F6481 | THALES SA | | 91634787 | F6481 | THALES SA | | 91634787 | F6980 | THALES TRAINING ET SIMULATION SAS | | 91616116 | F6980 | THALES TRAINING ET SIMULATION SAS | | 91752482 | F6980 | THALES TRAINING ET SIMULATION SAS | | 91616116 | FAQU7 | THALES SERVICES SAS | | FK-020-GG-B | 05228 | PTI TECHNOLOGIES INC. | | HC9020FDP8H | 06816 | PALL CORP | | HC9020FKP8H | 06816 | PALL CORP | | HC9020FUP8H | 06816 | PALL CORP | | E3070B-U03 | 13520 | DONALDSON COMPANY, INC. | | HC9020FUP8H | 17238 | PALL CORPORATION | | HC9020FKP8H | 1EP30 | PALL AEROPOWER CORPORATION | | HC9020FUP8H | F6951 | PALL FRANCE SA DIVISION PALLAEROSPACE |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 25.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.800 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 8.126 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | END CAPS AND CORE OF CORROSION-PROTECTED CARBON STEEL | | TEMP RATING | -45.0 DEG FAHRENHEIT NOMINAL |
|
|