|
|
|
National Stock Number:
4330-01-083-1898
Federal Supply Class:
4330
National Item Identification Number:
010831898
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| P16-1267 | 18265 | DONALDSON COMPANY, INC. | | P16-2766 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 200.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 3.875 INCHES MINIMUM AND 3.938 INCHES MAXIMUM | | BODY OVERALL LENGTH | 5.750 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 4.4 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 1.250 INCHES | | THREAD SERIES DESIGNATOR | UNF |
|
|