|
|
|
National Stock Number:
4330-01-135-0149
Federal Supply Class:
4330
National Item Identification Number:
011350149
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AC9990FSUKH | 18350 | PALL AEROPOWER CORPORATION | | F4E-050-BC-B | 05228 | PTI TECHNOLOGIES INC. | | HC9500FS-UKH | 06816 | PALL CORP | | HC9500FS-UKH | 18350 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 5.050 INCHES NOMINAL | | BODY OVERALL LENGTH | 10.630 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE AND 3.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER AND PLASTIC PHENOLIC FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | NOMINAL THREAD SIZE | 1.500 INCHES | | SPECIAL FEATURES | SPIN-ON TYPE | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | SURFACE TREATMENT | PAINT CONTAINER/CARTRIDGE | | TEMP RATING | -45.0 FAHRENHEIT MINIMUM AND 225.0 FAHRENHEIT MAXIMUM | | THREAD SERIES DESIGNATOR | UN |
|
|