|
|
|
National Stock Number:
4330-01-146-3149
Federal Supply Class:
4330
National Item Identification Number:
011463149
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 9326-241 | 33667 | KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS | | TYPE800 | 33667 | KING ENGINEERING CORPORATION DBA KING-GAGE SYSTEMS |
|
Techincal Specification:
| BODY DIAMETER | 7.320 INCHES MINIMUM AND 7.391 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.297 INCHES MINIMUM | | BODY OVERALL LENGTH | 1.516 INCHES MINIMUM AND 1.594 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | MESH 1ST FILTERING MEDIA RESPONSE | | FLOW DIRECTION | PARALLEL | | MATERIAL | ALUMINUM ALLOY FRAME | | MATERIAL | COPPER ALLOY OR COPPER FILTERING MEDIUM | | MESH SIZE | 80.0 | | MEDIA FOR WHICH DESIGNED | AIR | | SPECIAL FEATURES | W/STEEL PIN,0.094 IN.OD,IN TOP OF ELEMENT | | WIRE DIAMETER | 0.020 INCHES NOMINAL | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | SURFACE TREATMENT | ANODIZE FRAME |
|
|