|
|
|
National Stock Number:
4330-01-147-1372
Federal Supply Class:
4330
National Item Identification Number:
011471372
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 0734-1 | 00819 | SPX CORPORATION DEHYDRATION DIV DBA S P X AIR TREATMENT | | 0734-1 | 25795 | W.W. GRAINGER, INC. | | 3222919 | 00819 | SPX CORPORATION DEHYDRATION DIV DBA S P X AIR TREATMENT |
|
Techincal Specification:
| BODY DIAMETER | 1.510 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.270 INCHES NOMINAL | | BODY OVERALL LENGTH | 2.000 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | FILTERING MEDIA DESIGN | MATTED 2ND FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | MESH 1ST FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | COTTON FILTERING MEDIUM | | MATERIAL | STEEL CORROSION RESISTING CONTAINER/CARTRIDGE | | MESH SIZE | 32.0 | | MEDIA FOR WHICH DESIGNED | AIR | | SPECIAL FEATURES | FURNISHED W/ONE ORING,USED ON HANKISON CORP. AIR DRYER MODEL 8010 | | WIRE DIAMETER | 0.020 INCHES NOMINAL | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|