|
|
|
National Stock Number:
4330-01-170-9259
Federal Supply Class:
4330
National Item Identification Number:
011709259
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 12-109 REV3 PIECE 3 | 44256 | WM W NUGENT & CO INC | | 33-077 | 44256 | WM W NUGENT & CO INC | | 33-077-207 | 44256 | WM W NUGENT & CO INC |
|
Techincal Specification:
| BODY DIAMETER | 5.080 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.745 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.750 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | PERFORATED 1ST FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | WOVEN 2ND FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 30.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | STEEL COMP 304 FILTERING MEDIUM | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | PERFORATION DIAMETER | 0.200 INCHES NOMINAL | | PERFORATION QUANTITY | 17.0 PER SQUARE INCH | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|