|
|
|
National Stock Number:
4330-01-174-3772
Federal Supply Class:
4330
National Item Identification Number:
011743772
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 8221 | 04953 | EDO AIL SYSTEMS INC | | P-5-3/4-100-RV3 | 55524 | FLOW EZY FILTERS INC |
|
Techincal Specification:
| BODY DIAMETER | 3.375 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.625 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | DIFFERENTIAL PRESSURE | 0.2 POUNDS PER SQUARE INCH | | FEATURES PROVIDED | BY-PASS VALVE | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 0.4 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | MESH SIZE | 100.0 | | NOMINAL THREAD SIZE | 0.750 INCHES | | SPECIAL FEATURES | NYLON END;HEX FACILITY; 5 GPM;3 PSI VALVE;FILTRATION RATING 140.0 MICRONS,ABSOLUTE | | STYLE DESIGNATOR | SUMP TYPE | | WIRE DIAMETER | 0.005 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | NPT |
|
|