|
|
|
National Stock Number:
4330-01-177-4069
Federal Supply Class:
4330
National Item Identification Number:
011774069
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| HC9650FKT8H | 06816 | PALL CORP | | HC9650FKT8H | 1EP30 | PALL AEROPOWER CORPORATION | | P96-030-JF-8 | 05228 | PTI TECHNOLOGIES INC. | | P96-030-JF-B | 05228 | PTI TECHNOLOGIES INC. | | HC9650FUT8H | 06816 | PALL CORP | | HC9650FRT8Z | 1EP30 | PALL AEROPOWER CORPORATION |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 3.000 NOMINAL INCHES | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 8.000 NOMINAL INCHES | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER OR RESIN SYNTHETIC BODY | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | ELEMENT COLLAPSE PRESSURE RATING 150 PSID MIN.; 10.3 BAR | | TEMP RATING | -20.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
|
|