|
|
|
National Stock Number:
4330-01-192-7903
Federal Supply Class:
4330
National Item Identification Number:
011927903
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1300767 | 06816 | PALL CORP | | 1455840 | 45152 | OSHKOSH CORP | | G1482 | 08832 | SCHROEDER INDUSTRIES LLC | | 2CF796 | 45152 | OSHKOSH CORP | | 2CF796 | 75Q65 | OSHKOSH DEFENSE LLC | | 1455840 | 75Q65 | OSHKOSH DEFENSE LLC | | HC9800FDN8HY334 | 06816 | PALL CORP | | HC9800FUN8H | 06816 | PALL CORP | | HD9800Y123 | 06816 | PALL CORP | | HC9800FKN8H | 1EP30 | PALL AEROPOWER CORPORATION | | HC9800FKN8HY334 | 1EP30 | PALL AEROPOWER CORPORATION | | HC9800FKN8H | K6539 | PALL EUROPE LIMITED AEROSPACE DIVISION |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 8.556 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 6.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | W/ CRES END CAPS | | TEMP RATING | -45.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
|
|