|
|
|
National Stock Number:
4330-01-198-4384
Federal Supply Class:
4330
National Item Identification Number:
011984384
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10493329 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | C6010-8P1 | 9N879 | FLUITEK CORP | | FBO 60329 | 31381 | PARKER-HANNIFIN CORPORATION | | CC21-C | 79960 | ZENITH FUEL SYSTEMS LLC | | CC21-C | 87405 | FACET (OKLAHOMA) LLC | | CC-21C | K3043 | FACET INDUSTRIAL UK LTD | | OCP-10678 | 31381 | PARKER-HANNIFIN CORPORATION | | GM-B-122073 | K2103 | OLDBURY ENGINEERING CO LTD |
|
Techincal Specification:
| BODY DIAMETER | 6.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.094 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | BODY OVERALL LENGTH | 9.906 INCHES MINIMUM AND 10.016 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL FRAME | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | TOP OF ELEMENT W/O CENTER HOLE | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|