| DESIGN TYPE | REUSABLE |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.250 INCHES NOMINAL AND 11.750 INCHES NOMINAL |
| FEATURES PROVIDED | BY-PASS VALVE AND DRAIN PLUG AND MAGNET AND SWITCH-OVER VALVE |
| FILTRATION RATING IN MICRONS | 25.0 NOMINAL |
| FILTERING ELEMENT QUANTITY | 2 |
| FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW OR BY-PASS FLOW |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| FIRST INTAKE CONNECTION TYPE | RAISED FACE FLANGE CENTER |
| FIRST INTAKE FLANGE FACE STYLE | RAISED |
| FIRST INTAKE FLANGE OUTSIDE DIAMETER | 6.500 INCHES NOMINAL |
| FIRST INTAKE FLANGE RAISED FACE DIAMETER | 3.312 INCHES NOMINAL |
| FIRST INTAKE FLANGE RAISED FACE HEIGHT | 0.375 INCHES NOMINAL |
| FIRST INTAKE FLANGE SHAPE STYLE | ROUND W/UNTHREADED BOLT HOLES |
| FIRST INTAKE FLANGE THICKNESS | 1.312 INCHES NOMINAL |
| MATERIAL | IRON CAST BODY |
| MATERIAL | RUBBER BUNA N SEAL |
| MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MESH SIZE | 400.0 |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL THREAD SIZE | 0.500 INCHES |
| MOUNTING HOLE QUANTITY | 12 |
| MOUNTING TYPE | THREADED HOLE SIDE |
| SPECIAL FEATURES | 25 PSI BYPASS; ELECTRICAL DIRT ALARM |
| WIRE DIAMETER | 0.0018 INCHES NOMINAL |
| TEMP RATING | -40.0 FAHRENHEIT MINIMUM AND 225.0 FAHRENHEIT MAXIMUM |
| UNIT QUANTITY | 2 |