|
|
|
National Stock Number:
4330-01-286-8758
Federal Supply Class:
4330
National Item Identification Number:
012868758
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10PY20 | 19419 | MOTT CORP | | 10PY20 W/GA-106A-71 | 19419 | MOTT CORP | | 2103023-100 AND 280106-71 | 19419 | MOTT CORP | | 6146824 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.750 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL | | BODY OVERALL LENGTH | 19.687 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | MATERIAL | PLASTIC SEAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | WATER | | SPECIAL FEATURES | W/EPR GASKETS ETHYLENE PROPYLENE 80 DURAMETER SHOR A,PARKER COMPOUND E515-80 | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|