|
|
|
National Stock Number:
4330-01-295-3888
Federal Supply Class:
4330
National Item Identification Number:
012953888
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1730794 | 90005 | PUROLATOR FACET INC. | | 21-12111-7 | 05228 | PTI TECHNOLOGIES INC. | | 21-12111-7 | 81873 | WOODWARD HRT INC | | 337-524 | 99193 | HONEYWELL INTERNATIONAL INC. | | 337-524-9302 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| BODY DIAMETER | 0.828 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.375 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.875 INCHES NOMINAL | | DESIGN TYPE | LIMITED | | FILTERING MEDIA DESIGN | WOVEN SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | SPECIAL FEATURES | SOLID ON ONE END |
|
|