|
|
|
National Stock Number:
4330-01-299-9518
Federal Supply Class:
4330
National Item Identification Number:
012999518
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 9127513300 | 6T229 | MACHINERY DISTRIBUTION INC | | 9127513300 | 78640 | MITSUBISHI CATERPILLAR FORKLIFT AMERICA, INC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 14.2 POUNDS PER SQUARE INCH | | BODY DIAMETER | 3.543 NOMINAL INCHES | | BODY OVERALL LENGTH | 6.575 NOMINAL INCHES | | FEATURES PROVIDED | DIFFERENTIAL PRESSURE RELIEF VALVE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 15.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | PAPER FILTERING MEDIUM | | III STYLE DESIGNATOR | SUMP TYPE | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |
|
|