| DESIGN TYPE | REUSABLE |
| DIFFERENTIAL PRESSURE | 40.0 POUNDS PER SQUARE INCH |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.688 INCHES NOMINAL AND 3.500 INCHES NOMINAL |
| BODY HEIGHT | 17.950 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 5.940 INCHES NOMINAL |
| FEATURES PROVIDED | AIR BLEED VALVE AND DIFFERENTIAL PRESSURE INDICATOR AND DRAIN PLUG AND BY-PASS VALVE AND THERMAL LOCKOUT |
| FILTERING ELEMENT QUANTITY | 1 |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | NOT IDENTICAL |
| FIRST DISCHARGE CONNECTION TYPE | THREADED INTERNAL TUBE TOP |
| FIRST DISCHARGE NOMINAL THREAD SIZE | 1.250 INCHES |
| FIRST DISCHARGE THREAD DIRECTION | RIGHT-HAND |
| FIRST DISCHARGE THREAD SERIES DESIGNATOR | UN |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL TUBE HEAD SIDE |
| FIRST INTAKE NOMINAL THREAD SIZE | 1.250 INCHES |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMIL-F-24402(SH) MIL SPEC 3RD MATERIAL RESPONSE FILTERING MEDIUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A536-77 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-8791 MIL SPEC 1ST MATERIAL RESPONSE SEAL AND MIL-R-83248 MIL SPEC 2ND MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1029 NATIONAL SPEC SINGLE MATERIAL RESPONSE SEDIMENT BOWL |
| MATERIAL | ANY ACCEPTABLE FILTERING MEDIUM |
| MATERIAL | IRON CAST BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL AND PLASTIC SEAL |
| MATERIAL | STEEL SEDIMENT BOWL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 3300.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL THREAD SIZE | 0.312 INCHES |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | THREADED HOLE TOP AND OUTLET CONNECTION TOP |
| SPECIAL FEATURES | OUTLET ON TOP OF HEAD; PORTS ARE STRAIGHT THREAD O-RING BOSS FOR 1.250IN,OD.TUBE PER SAE J514D; MTG HOLES 5/16-18UNC-2B; VISUAL INDICATOR W/PROJECTING POP-UP; MANUAL RESET FEATURE |
| STYLE DESIGNATOR | HIGH PRESSURE THREADED BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325C,T2,CL2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT | ZINC BODY |
| TEMP RATING | -20.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |