| STYLE DESIGNATOR | TEE TYPE (HYDRAULIC) |
| BODY LENGTH | 3.750 INCHES NOMINAL |
| BODY WIDTH | 2.750 INCHES NOMINAL |
| BODY HEIGHT | 8.000 INCHES NOMINAL |
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 6.470 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 2024 BODY |
| CELLULOSE FILTERING MEDIUM |
| RUBBER BUNA N SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| DESIGN TYPE | REUSABLE |
| FILTERING ELEMENT QUANTITY | 1 |
| FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE AND |
| 10.0 NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON OR |
| AIR |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| TEMP RATING | -40.0 DEG FAHRENHEIT MINIMUM AND |
| 250.0 DEG FAHRENHEIT MAXIMUM |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL TUBE HEAD SIDE |
| FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| FIRST INTAKE NOMINAL THREAD SIZE | 0.500 INCHES |
| FIRST INTAKE THREAD QUANTITY PER INCH | 8 |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| MOUNTING TYPE | OUTLET CONNECTION AND |
| INLET CONNECTION AND |
| UNTHREADED HOLE HEAD SIDE |
| MOUNTING HOLE QUANTITY | 2 |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 2.000 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.345 INCHES NOMINAL |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| SPECIAL FEATURES | 5000.0PSI; COLLAPSE 3000.0PSI; 10.0GPM; 300.0SCFM |
| SUPPLEMENTARY FEATURES | HEX WRENCHING FACILITY ON BOTTOM |