|
|
|
National Stock Number:
4330-01-439-2314
Federal Supply Class:
4330
National Item Identification Number:
014392314
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| ACI-63301CTB | 13573 | PARKER HANNIFIN CORP | | ACI-63301DTB | 13573 | PARKER HANNIFIN CORP | | FGI-633SB | 87405 | FACET (OKLAHOMA) LLC | | GNG-633SB | 87405 | FACET (OKLAHOMA) LLC |
|
Techincal Specification:
| DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 5.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 6.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 3.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 33.000 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 13.860 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 0.5 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | GLASS FIBER FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WATER ABSORBING MONITOR CARTRIDGE | | SPECIAL FEATURES | WATER ABSORBING ELEMENT; MOUNTING END HAS THREADED BASE WHICH SCREWS ON VELCON 600T MOUNTING ADAPTER; TOP END IS A BLIND END CAP WITH A 1" LONG BOLT FOR MOUNTING TO SPIDER; RATED AT 120GPM | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (NON-RIGID) | | TEMP RATING | 225.0 DEG FAHRENHEIT MAXIMUM |
|
|