|
|
|
National Stock Number:
4330-01-462-7098
Federal Supply Class:
4330
National Item Identification Number:
014627098
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 932017 | 05779 | PARKER-HANNIFIN CORPORATION | | 932017Q | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 8.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | GLASS FIBER FILTERING MEDIUM | | SPECIAL FEATURES | FILTERS THREE MICRONS AT 50.0 PERCENT, EIGHT MICRONS AT 95.0 PERCENT, AND TEN MICRONS AT 98.7 PERCENT - BASED ON MULTI - TEST RUN AT FOUR GPM TO 25 PSID PER ANSI/B93.31-1973 WITH 50.0 PPM ANTI - STATIC ADDITIVE; DIRT CAPACITY 13 GRAMS; ESTIMATED LIFE 370.0 GALLONS; NOT RECOMMENDED FOR FLUID VISCOSITIES GREATER THAN 16,000.0 SUS | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -15.0 FAHRENHEIT MINIMUM AND 180.0 FAHRENHEIT MAXIMUM |
|
|