|
|
|
National Stock Number:
4330-01-473-1241
Federal Supply Class:
4330
National Item Identification Number:
014731241
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 12413146 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 925779 | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 3.765 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.580 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.256 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | MATERIAL | ALUMINUM BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | SEAL MATERIAL NITRILE, FILTER MEDIA MICROGLASS, DIRT CAPACITY 27 TO 50 GRAMS; MAXIMUM OPERATING PRESSURE 200 PSI; MAXIMUM AIR FLOW RATE 150.0 CUBIC METERS PER MINUTES | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | -40.0 CELSIUS MINIMUM AND 107.0 CELSIUS MAXIMUM |
|
|