|
|
|
National Stock Number:
4330-01-479-1012
Federal Supply Class:
4330
National Item Identification Number:
014791012
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 4330PL0652549 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 4330PL1620615 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | E9-16 | 00819 | SPX CORPORATION DEHYDRATION DIV DBA S P X AIR TREATMENT | | 792253 | 75906 | PACIFIC CONSOLIDATED INDUSTRIES LLC | | 792253-001 | 75906 | PACIFIC CONSOLIDATED INDUSTRIES LLC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DROP PRESSURE | 6.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.620 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.750 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.590 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 3.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | FIBER FILTERING MEDIUM | | MATERIAL | STEEL CORROSION RESISTING BODY | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | WATER | | MOUNTING FLANGE DIAMETER | 2.310 INCHES MAXIMUM | | MOUNTING FLANGE THICKNESS | 0.270 INCHES MAXIMUM | | SPECIAL FEATURES | MAX PRESSURE: 300 PSIG, FLOW CAPACITY: 35 SCFM AT 100 PSIG, PRESSURE DROP: DRY: 1 TO 2 PSI, WET 2 TO 6 PSI, MATERIAL: END CORE IS PLASTIC | | TEMP RATING | 150.0 DEG FAHRENHEIT MAXIMUM |
|
|