|
|
|
National Stock Number:
4330-01-480-2697
Federal Supply Class:
4330
National Item Identification Number:
014802697
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 7590859 | 05228 | PTI TECHNOLOGIES INC. | | 7590859-101 | 05228 | PTI TECHNOLOGIES INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | DROP PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | BODY INSIDE DIAMETER | 0.751 INCHES MINIMUM AND 0.753 INCHES MAXIMUM | | BODY OVERALL LENGTH | 3.115 INCHES NOMINAL | | FILTERING MEDIA DESIGN | ROLL TYPE SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 15.0 ABSOLUTE | | FLOW DIRECTION | PARALLEL | | LARGEST OUTSIDE DIAMETER | 1.183 INCHES MINIMUM AND 1.193 INCHES MAXIMUM | | MATERIAL | ANY ACCEPTABLE BODY | | III STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SMALLEST OUTSIDE DIAMETER | 1.191 INCHES MINIMUM AND 1.193 INCHES MAXIMUM | | SPECIAL FEATURES | FILTER ELEMENT FLUID PRESSURE, HYDRAULIC AIRCRAFT, DISPOSABLE; RATED FLOW: 12GPM; OPERATING PRESSURE: 3000 PSI | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |
|
|