|
|
|
National Stock Number:
4330-01-491-4685
Federal Supply Class:
4330
National Item Identification Number:
014914685
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| CA43-3SB | 87405 | FACET (OKLAHOMA) LLC | | FACET # CA 43-3 SB | 87405 | FACET (OKLAHOMA) LLC | | FPE43C3SB | 5V505 | FILPRO CORP |
|
Techincal Specification:
| BODY DIAMETER | 6.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 3.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 43.250 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 75.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | ENCASED 4TH FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | LAYERED 1ST FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | PLEATED ALL FILTERING MEDIA RESPONSES | | FILTRATION RATING IN MICRONS | 0.3 ABSOLUTE | | FLOW DIRECTION | INSIDE OUT | | PART NAME ASSIGNED BY CONTROLLING AGENCY | COALSESCER CARTRIDGE | | MATERIAL | RUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | 240.0 FAHRENHEIT MAXIMUM |
|
|