|
|
|
National Stock Number:
4330-01-493-8909
Federal Supply Class:
4330
National Item Identification Number:
014938909
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 17-1-1653 | 81337 | W1D1 NATICK SOLDIER CENTER | | AKFM802 | 0RXR4 | AIREX CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 6.730 INCHES NOMINAL | | BODY THICKNESS | 0.050 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER ELEMENT,FLUID | | MATERIAL | PLASTIC POLYETHYLENE OR PLASTIC POLYPROPYLENE BODY | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | STYLE DESIGNATOR | ROUND (BASICALLY FLAT) |
|
|